ABOUT ARUBA SERVICES CONTACT US HOME

Pliers
Professional Miniature Pliers
Snips/Shears and Riveters
Aviation Snips, Offset Snips, Tinner Snips
Refrigeration Tools
Tube Cutting/ Flaring Tools
Electronic Service Soldering Iron
Electronic Services Kits
Engine Tools
Base Engine
Wrenches
Sockets
Screwdrivers
Professional Screwdriver Set
General
Purpose Tools
Hammers
   
 
SEARCH BY CODE NUMBER       
   
Click on image to see enlarged view

Professional Heavy Duty Hand Riveter



Parts Indicate for 6009

PART No. Description Quantity
6009-01 NOSePiece 2.4,3.2,4.0 and 4.8mm One
6009-02 Jaws Two
6009-03 Jaws Case One
6009-04 Jaw Pusher One
6009-05 Jaw Pusher Spring One
6009-06 Frame Head One
6009-07 Power Coupling One
6009-08 Frame nut One
6009-09 Body One
6009-10 Hex.bolt M6 x35 One
6009-11 Arm One
6009-12 Collar One
6009-13 Cross Head One
6009-14 Spacer-A One
6009-15 Large Trellis Arm One
6009-16 Hex-bOlt M6x25 One
6009-17 Small Trellis Arm One
6009-18 Spacer- B One
6009-19 Handle One
6009-20 Nut (With Nylon) One
6009-21 Spacer - C One
6009-22 Nut Sixteen


 

 

Rivert Diameter Drill Size Hose Size
2.4mm
3.2mm
4.0mm
4.8mm
 No.41
No.30
No.20
No.11		 2.5mm
3.3mm
4.1mm
4.9mm

Note: Details Spec. of Blind Rivet Please refer to page 22

MAINTENANCE INSTRUCTION

Notice

To ensure that maximum life is obtained from the jaws of your riveter, it is necessary after applying 6009 Riveter to insert a few drops of machine oil to the jaws. This will reduce unnecessary wear. In the case where the jaws are worn or pitted, they should be changed immediately as faulty jaws will at£ect the efficiency of your riveter.

INSTRUCTIONS FOR CHANGING JAWS

(1) Loosen frame nut (No. 6009-08) and disengage the frame
      head (No. 6009-06), from the body of the riveter by using
      the spanner supplied.
(2) Disengage the Jaw casing (No. 6009-03) by utilising the
      Spanner.
(3) Insert your new jaws with a few drops of oil and reassemble.

  
Snips | 1 | 2 | 3 | 4 | 5

Designed by JND Designs